一、產品簡介
為滿足復雜地質條件下各種井型的深井、超深井鉆探的需要,硅谷研究院研發了新一代硅氟抗高溫、抗復合鹽降粘劑SF260-Ⅱ。該產品不僅保持了SF260的特性,且在抑制泥頁巖水化能力、提高鉆井液的造壁功能、抗高溫(勝科1#在鉆探7002m,井底溫度240℃時順利通過)老化性能和抗巖鹽、鹽膏層污染能力等方面得到明顯加強,大大簡化超深井鉆井液配方組成且性能穩定、井下安全。具有國內外在超高溫、高密度(大于2.3g/cm3)等復雜條件下表現出較強的降粘穩定作用,并能使泥漿穩定周期延長3-5倍,有利于提高深井、超深井的鉆井效率和效益,實現快速安全鉆探目的。 推薦加量1~2%。
二、性能指標
項 目 |
指 標 |
|
外觀 |
黑色粘稠液體 |
|
pH值 |
≤ 12 |
|
降 粘 率 (%) |
室溫 加量1.0% (體積份) |
≥ 85 |
180 ± 2 oC 加量1.5% (體積份) |
≥ 80 |
|
260 ± 2 oC 加量2.0% (體積份) |
≥ 80 |
三、包裝、運輸及儲存
本產品包裝于鐵桶內,每桶凈重200(±1%)kg,也可根據客戶要求確定包裝(特殊要求雙方議定)。
本品不燃、不爆、沒毒、無害,按非危險品運輸管理。
產品儲存溫度-40oC~+40oC,在儲存過程中應注意防泄漏、防凍。
本品避免與眼睛接觸,否則用大量清水清洗。
本品保質期兩年。
SF260-Ⅱ Silicon Fluorine High Temperature Viscosity Reducer for Drilling Fluid
Product Details
Product Introduction
In order to meet the needs of deep and ultra deep well drilling of various types of wells under complex geological conditions, Silicon Valley Research Institute has developed a new generation of silicon fluoride viscosity reducer sf260 - Ⅱ with high temperature resistance and composite salt resistance. The product not only maintains the characteristics of sf260, but also significantly improves the ability to inhibit shale hydration, improve the wall building function of drilling fluid, high temperature resistance (Shengke 1 # successfully passes when drilling 7002m and bottom hole temperature 240 ℃) aging performance and rock salt and salt gypsum layer pollution resistance, greatly simplifies the composition of ultra deep well drilling fluid, and has stable performance and downhole safety. It is unique at home and abroad. It shows super viscosity reduction and stability under complex conditions such as ultra-high temperature and high density (more than 2.3g / cm3), and can extend the mud stability period by 3-5 times. It is conducive to improving the drilling efficiency and benefit of deep and ultra deep wells, and realizing the purpose of rapid and safe drilling. The recommended dosage is 1 ~ 2%.
Performance Index
project |
index |
|
Appearance |
Black viscous liquid |
|
pH |
≤ 12 |
|
Viscosity reduction rate(%) |
Room temperature Dosage 0.75% (Mass/Volume fraction) |
≥ 85 |
180 ± 2 oC Dosage 1.5% ((Mass/Volume fraction) |
≥ 80 |
|
260 ± 2 oC Dosage 2.0% (Mass/Volume fraction) |
≥ 80 |
Packaging, Transportation and Storage
The product is packed in iron drums with a net weight of 200 (± 1%) kg. The packaging can also be determined according to the customer's requirements (special requirements agreed by both parties).
This product is non combustible, non explosive, non-toxic and harmless, and is managed as non dangerous goods transportation.
The storage temperature of the product is - 40℃ to + 40℃ . attention should be paid to anti leakage and anti freezing during storage.
Avoid contact with eyes, or wash with plenty of water.
The shelf life of this product is two years.